Automatic Flush System for Drinking Systems
I sistemi di abbeveraggio LUBING sono stati collaudati e utilizzati con successo centinaia di migliaia di volte per l’approvvigionamento idrico ottimale dei vostri animali in tutti i tipi di allevamento.
Grazie alla loro struttura modulare, possono essere ampliati e completati in qualsiasi momento.
I nipple LUBING, brevettati e leader a livello mondiale, rappresentano la soluzione ottimale per una gestione efficiente, igienica e rispettosa degli animali.
Automatic Flushing with Ultrasound ULTRAFLUSH
LUBING automatic flush systems can be optionally equipped with UltraFlush ultrasonic cleaning technology right from the start.
The system fits seamlessly into newly built systems and consists of an ultrasonic actuator with its own electronic control.
The mechanical pulses do not affect water additives – the system only loosens and prevents deposits in the drinking line.
Advantages of Automatic Flush System
- Perfect hygiene in all drinking lines.
- Saves time compared to manual flushing.
- Reliably prevents biofilms in the nipple pipe.
- Lower mortality rates.
- Improved weight gain.
- Monitored drinking water temperature through „temperature flush“ function.
- Pinpoint flushing of treated water to the end of the drinking line through „Fill“ function.
- Easy flushing of all drinking lines after a medication.
- Safe switching off of the flushing function during medication.
- Cost-effective solution compared to chemical drinking line sanitation.
Automatic flush system for floor management
The LUBING flush system consists of the following elements:
1. LUBING Touch Control LCW
2. Optima E-Flush
3. Flush breather unit
4. Drain-kit
5. Drain pipe
1. LUBING Touch Control LCW
With the controller, the following values can be adapted to your individual needs:
- The duration of the flushing process.
- The flush duration time has to be adjusted depending on the length of the drinking line.
- The start time of flushing.
Each drinking line is flushed seperatly.
Further information about the controller LUBING Touch Control LCW see the accompanying prospectus.
2. Optima E-Flush
The pressure regulator Optima E-Flush is preassembled and with mounting of the actuator ready for automatic flushing.
The actuator is supplied from the controller with the required voltage of 24 V DC.
3. Flush breather unit
At the end of each drinking line a flush breather unit is installed.
The valve of the breather unit will be closed by the flushing water pressure.
4. Drain-kit
The drain-kit is a hose connection between the flush breather unit and the drain pipe in order to conduct the flushing water outside.
5. Drain pipe
With the drain pipes the flushing water is conducted to an appropriate location outside.
LUBING Touch Control LCW
With the LUBING Touch Control LCW up to 10 drinking lines can be automatically flushed.
The flush functions can be adapted to individual needs in the menu.
Optima E-Flush
With the new developed flush valve for the pressure regulator and the actuator is everything prepared for the automatic flushing.
No other attachments are needed.
Actuator
The actuator opens and closes the flush valve in the pressure regulator.
During a power failure the drinking line can be flushed by hand.
Flush breather unit
The flush breather unit works fully automatic and the breather valve will be closed by the water pressure during the flushing process.
Automatic flush system for cage management
The LUBING flush system consists of the following elements:
1. LUBING Touch Control LCW
2. Optima E-Flush
3. Flush breather unit
4. Drain-kit
5. Drain pipe
1. LUBING Touch Control LCW
With the controller, the following values can be adapted to your individual needs:
- The duration of the flushing process.
- The flush duration time has to be adjusted depending on the length of the drinking line.
- The start time of flushing.
Each drinking line is flushed separatly.
Further information about the controller LUBING Touch Control LCW see the accompanying prospectus.
2. Optima E-Flush
The pressure regulator Optima E-Flush is preassembled and with mounting of the actuator ready for automatic flushing.
The actuator is supplied from the controller with the required voltage of 24 V DC.
3. Flush breather unit
Alla fine di ogni linea viene montata un’unità di sfiato.
La valvola dell’unità di sfiato verrà chiusa dalla pressione dell’acqua di lavaggio.
4. Drain-kit
The drain-kit is a hose connection between the flush breather unit and the drain pipe in order to conduct the flushing water outside.
5. Drain pipe
With the drain pipes the flushing water is conducted to an appropriate location outside.
LUBING Touch Control LCW
LUBING Touch Control LCW for controlling of the extension boxes.
The flush functions can be adapted to individual needs in the menu.
Extension boxes
The extension boxes for each 8 additional pressure regulator Optima E-Flush can be expanded in series to any number.
Optima E-Flush
With the new developed flush valve for the pressure regulator and the actuator is everything prepared for the automatic flushing.
No other attachments are needed.
Flush breather unit
The flush breather unit works fully automatic and the breather valve will be closed by the water pressure during the flushing process.
Main facts
In addition to the flush breather unit and the drain-kit, used once per drinker line, a drain pipe* must be installed for the automatic flush system.
Other required components are the pressure regulator Optima E-Flush and the controller LUBING Touch Control LCW and if necessary additional flush boxes.
Versions of the automatic flush system
The controller is designed for use with supply voltages ranging from 90 to 264 V 50/60 Hz.
The actuators are supplied from the controller with 24 V DC.
* Please observe the legal requirements for wastewater treatment.