
Drinking systems

Nipple drinkers

for layers in cages
Drinking-Systems and nipple drinkers for layers in cages

Drinking-System for layers
The LUBING Drinking-System for layers is designed in such a way that it can adapted individually to every layer system.
Always hold the optimum water supply of the birds in high regard.
Additionally pay attention that the environment affect is less as possible.
Splash-water should not lead to corrosion or dampen the manure additionally.
Our million times approved LUBING nipples and the extensive accessories, e.g. the perches, air channels and drip cups, underlines LUBING as your most
competent partner.
LUBING Drinking-Systems and accessories
In order to guarantee optimum water supply for all animals in the system, the drinking line is installed in height of 38 – 41cm in a distance to the feeding line. Through the cycle of the animals between the drinking line and the feeding line, no water reaches the feeding trough.
The nipples could be placed in cages:
• in the partition with drip cup
In all systems the nipple could be placed:
• anywhere with V-trough
• anywhere with drip cup and reduced nipples could be placed:
• anywhere without drip cup.

Main water supply
Optimum water quality increases the service life of the Drinking-Systems.
With integrated doser for the supplement of vitamins or medicines.
Pressure regulator Optima E-Flush/ Ball tank
With the Pressure regulator the water column can be adjusted as needed.
The optional screw-in actuator allows automatic flushing of the drinker line.
The water column for the ball tank is fixed.


Mixer
In the Mixer additives, e.g. vitamins or medicines, are permanently circulated while being added to the drinking water.
Nipple with drip cup
One drinking nipple on each side of the partition.
Centrically under the nipples the drip cup directly in the partition.


Perches/Air channel
LUBING Perches are co-extruded of 2 materials.
The stable bearing has ranges with soft slide-retardant material.
The air channel for optimum dry manure.
Breather unit
At the end of each drinking line a breather unit is installed.
It ensures escaping of the air during filling the line with water and shows with the red ball in the pipe the height of the water column.


Nipple with V-trough
The nipple pipe runs in the center so that the nipples of both sides can be used.
To protect from corrosion and for dry manure the V-trough is underneath the nipples.
Nipple without drip cup or V-trough
For the use without drip cup or Vtrough the flow rate of the nipples is reduced.
This reduces possible splashwater to a minimum.

Nipple drinker for laying hens
LUBING nipples are made of high quality stainless steel or quality plastic.
LUBING Stainless steel nipple
Art. 4001

LUBING Push nipple
Art. 4003

LUBING Stainless steel nipple reduced Art. 4071

LUBING Combinipple
Art. 4005-00

LUBING Combinipple reduced
Art. 4075-00

LUBING Combinipple reduced
Art. 4075-00

The structure in principle
It does not matter which layer system is used, the principle design of the LUBING Drinking-System is always thesame.
The water comes through the Main Water Supply (filtred) in to the house to the pressure regulator or the ball tank.
These supply the nipple pipes (up to 5 m) with the right water pressure.
The nipple pipes will be coupled to the house length (max. 100 m).
A breather unit is installed at the end of each drinking line.

Layout
LUBING offers numerous solutions for the water supply for poultry.
Whether nipples with or without drip cup or Vtrough.
LUBING offers the complete Drinking-System for your layers.
Call us. We gladly advise you.
The layout of the Drinking-System depence on the used system.
We provide you gladly a noncommittal individual offer.
Recommended number of birds per nipple*
* The number of the animals per nipple has to be reduced in hot climates and in dependence on the light-/waterprogram. Pay attention to national / regional regulations!