Floor-watering system without cups
The LUBING Floor-watering system without cups consists of the following elements:
1. Water supply
2. Drinking elements
3. Breather unit
4. Suspension
1. Water supply
The Main water supply secures an optimum water quality for a long service life of the nipple drinkers. The water should have the quality of drinking water. At any case the water must be filtered.
The water runs from the Main water supply through the Pressure regulator with integrated flush system into the drinking lines. The Pressure regulator is available for front or middleinstallations
2. Drinking Elements
The drinking lines are supplied in assembled elements of 3m length.
These elements are to be coupled to the length of the house.
3. Breather Unit
At the end of each drinking line a flush breather unit is installed. All valves of the breather units close during the flushing, which could be started by hand or alternatively by the automatic flush system.
4. Suspension
The drinking lines are suspended by hangers, which are stuck on the aluminium profiles every 3 m. These hangers are connected via ceiling pulleys with the central hoisting cable.
The drinking line can be adjusted to the desired height by Hand winch or Ceiling winch and can be winched up easily to the ceiling for emptying or cleaning.
Main water supply
Optimum water quality increases the service life of the Drinking Systems.
With integrated doser for the supplement of vitamins or medicines.
Pressure regulator Optima E-Flush
With the Pressure regulator the water column can be adjusted as needed.
The optional screw-in actuator allows automatic flushing of the drinker line.
Mixer
In the Mixer additives, e.g. vitamins or medicines, are permanently circulated while being added to the drinking water.
CombiMaster reduced
CombiMaster reduced Art. 4095 00.
For the use without Drip cup.
Slope regulator
The adjustable LUBING Slope regulator compensates for height
differences between 10 and 45 cm.
Suspension
The drinking line is suspended approx. 3 m with a plastic rope, which is linked with the central hoisting cable.
Support profile
Alternatively also a steel tube can be used above the nipple pipe.
Flush breather
The Flush breather unit at the end of each drinking line works, e.g. with the LUBING Flush controller, automatically. For flushing is no additional handling necessary.
Drinker
CombiMaster
Art. 4050-00
New nipple with bigger body and pin.
Less height in the nipple pipe. Drinker
SteelMaster
Art. 4020 / 4021
New nipple that ensures a water flow appropriate to the age of the animals. Drinker
TOP-Nipple
Art. 4022
Side-operated drinker for rearing. Drinker
TOP-Combinipple
Art. 4024-00
Side-operated drinker for rearing. Perfect water supply
The central element of the Floorwatering system is the TOPCombinipple, reduced.
By the reduced flow rate this nipple ensures a dry litter without a drip cup.
The right height depends on the size of the animals: They should have to stretch slightly to reach the nipples.
Every delivered system includes a height-table, making it easy to find the right height of the drinking line from the first day on.
TOP-Combinipple reduced Art. 4078-00
Main facts at a glance
* The number of animals per nipple has to be reduced for heavy birds, in hot climates and in dependence of the light/water programs! Pay attention to national / regional regulations!
** While using the light/water programs the length of line has to be reduced by 1/3.
