Drinkers for Ducks
on the ground

Drinkers for Ducks on the ground

The LUBING Floor-watering system for ducks consists of the following elements:

1. Water supply
2. Drinking elements
3. Breather unit
4. Suspension

1. Water supply

The Main water supply secures an optimum water quality for a long service life of the nipple drinkers.
The water should have the quality of drinking water. At any case the water must be filtered.
The water runs from the Main water supply through the Pressure regulator or the Ball tank with integrated flush system into the drinking lines. Both versions are available for front or middle-installations.

2. Drinking Elements

The drinking lines are supplied in
assembled elements of 3m length.
These elements are to be coupled to the length of the house.

3. Breather Unit

At the end of each drinking line a flush breather unit is installed. All valves of the breather units close during the flushing, which could be started by hand or alternatively by the automatic flush system.

4. Suspension

The drinking lines are suspended by hangers, which are stuck on the aluminium profiles every 3 m. These hangers are connected via ceiling pulleys with the central hoisting cable.
The drinking line can be adjusted to the desired height by Hand winch or Ceiling winch and can be winched up easily to the ceiling for emptying or cleaning.

Main water supply

Optimum water quality increases the service life of the Drinking-Systems.
With integrated doser for the supplement of vitamins or medicines.

Pressure regulator Optima E-Flush

With the Pressure regulator the water column can be adjusted as needed.
The optional screw-in actuator allows automatic flushing of the drinker line.


In the Mixer additives, e.g. vitamins or medicines, are permanently circulated while being added to the drinking water.

Ball tank

The Ball tank with integrated flush system keeps the pressure constantly at 20 cm water column.

Starter Cup

The nipple drinkers can be used from the first day on.

For low losses in the first five days use the LUBING Starter cups.

Snap Starter Cup

The Snap-Starter-Cup item no. 3007 is used for the rearing phase of:

  • laying hens
  • ducks

It is fixed directly on the 22×22 square tube in correspondence with the drinker.

Our Top-Nipple or standard nipple driker is required for use.


The LUBING TOP-Nipple can easily be used by the birds all around 360°.
For use from the first day!

Flush breather

The Flush breather unit at the end of each drinking line works, e.g. with the LUBING Flush controller, automatically.

For flushing is no additional handling necessary.

Art. 4050-00

New nipple with bigger body and pin. Less height in the nipple pipe.

Art. 4020 / 4021

New nipple that ensures a water flow appropriate to the age of the animals.

Art. 4022

Side-operated drinker for rearing.

Art. 4024-00

Side-operated drinker for rearing.

Perfect water supply

The central element of the floorwatering system is the TOP-Nipple, ensuring an optimum water flow for every animal age.
The combination of nipple and drip cup ensures a dry manure.
The right height depends on the size of the animals: They should have to stretch slightly to reach the nipples.
Every delivered system includes a height-table, making it easy to find the right height of the drinking line from the first day on.

Main facts at a glance

* The number of animals per nipple has to be reduced in hot climates and in dependence of the light/water programs!
Pay attention to national / regional regulations!