Drinkers for Layers
Layer rearing

Floor-watering system for Layers

The LUBING Floor-watering system for breeders consists of the following elements:
1. Water supply
2. Drinking elements
3. Breather unit
4. Suspension

  • For rearing with CombiMaster Art. 4050-00
  • For combined rearing and layer use with TOP-Nipple Art. 4022
  • For layer use with stainless steel nipple

1. Water supply

The Main water supply secures an
optimum water quality for a long
service life of nipple drinkers. The
water should have the quality of
drinking water. At any case the water must be filtered.
The water runs from the Main water supply through the Pressure regulator or the Ball tank with integrated flush system into the drinking line. Both versions are available for front or middle installations.

2. Drinking Elements

The drinking lines are supplied in
assembled elements of 3 m length.
These elements are to be coupled to the length of the house.

3. Breather Unit

At the end of each drinking line a flush breather unit is installed. All valves of the breather units close during the flushing, which could be started by hand or alternatively by the automatic flush system.

4. Suspension

The drinking lines are suspended by hangers, which are stuck on the aluminium profiles every 3 m. These hangers are connected via ceiling pulleys with the central hoisting cable.
The drinking line can be adjusted to the desired height by Hand winch or Ceiling winch and can be winched up easily to the ceiling for emptying or cleaning.

Main water supply

Optimum water quality increases the service life of the Drinking-Systems.
With integrated doser for the supplement of vitamins or medicines.

Pressure regulator Optima E-Flush

With the Pressure regulator the water column can be adjusted as needed.
The optional screw-in actuator allows automatic flushing of the drinker line.


In the Mixer additives, e.g. vitamins or medicines, are permanently circulated while being added to the drinking water.

Ball tank

The Ball tank with integrated flush system keeps the pressure constantly at 20 cm water column.

Flush breather

The Flush breather unit at the end of each drinking line works, e.g. with the LUBING Flush controller, automatically.

For flushing is no additional handling necessary

Roller System

LUBING Roller System, currentless.

Double wire

LUBING Double wire, currentless.

Shocker wire

LUBING shocker wire for main fencer

Snap Starter Cup

The Snap-Starter-Cup item no. 3007 is used for the rearing phase of:

  • laying hens
  • ducks

It is fixed directly on the 22×22 square tube in correspondence with the drinker.

Our Top-Nipple or standard nipple driker is required for use.

Art. 4050-00

New nipple with bigger body and pin. Less height in the nipple pipe.

Art. 4020 / 4021

New nipple that ensures a water flow appropriate to the age of the animals.

Art. 4022

Side-operated drinker for weaning.

Art. 4024-00

Side-operated drinker for weaning.

HR version

• Increased resistance to acids

• Improved tolerance to chlorine

• Same performance as other drinkers

TOPCombinippel HR
Art. 4024-HR- 00

With yellow plastic body with R1/8“ thread and premium stainless steel valve; Flow rate: 70-80 cm³/min.

TOPCombinippel HR
Art. 4024-HR- 01

As item 4024-00 but with red plastic body.

Perfect water supply for breeders

LUBING Drinking-Systems ensure optimum water supply for every
animal age. 

The height of the drinking line should match the size of the birds: They should have to stretch lightly to reach the nipples. Every Drinking-System comes with a height table to find the perfect adjustment.

Main facts at a glance