
Loader Conveyor

Egg loader belt
Loader conveyor from the laying area to the central conveyor
for all LUBING Loader conveyors, Rod conveyors and Steep conveyors
Loader conveyor for egg transport from the laying area to the central conveyor
For transporting the eggs from the laying area in deep litter to the central conveyor, LUBING offers various approaches for any house situation.
Small and flexible
In the laying area, the eggs must usually be transferred from the nest to a subsequent conveying system that transports the eggs towards further processing units.
This is where the LUBING loader conveyors are employed – small, flexible units that cover the short transport distances to the central conveyor line.
Connection to central Conveyor-Systems
By means of the chains that are different for rod conveyors, curve conveyors, loader conveyors or steep conveyors, conveyors of a different width transfer the eggs from the nest to the central Conveyor-System.
Transport with loader conveyor is also expedient from a production related point of view: The inter-stage conveying systems serve to separate the central conveyor line from the house area and thus make it possible to obtain maximum hygiene standards.
Additionally, the general central conveyor process can be simplified: Apart from savings achieved by the design, simplified linear conveyor lines can also allow the implementation of higher running speeds.
Furthermore, a central conveyor line that is as straight as possible enables the eggs to be transported with maximum care.
The variety of loader conveyors offered by LUBING and the possibility of adapting them to different situations by means of the various conveying chains provided makes it possible to constitute the optimum system exactly tailored to your needs.
Rod conveyor unit
Rod conveyor units are used for linear transport from adjacent nests at the same height or at different heights.
The conveyor chain consists of two hollow pin chains that are connected with metal rods with slid-on plastic pipes.
The rod conveyor units are provided in designs of either one conveyor section or two parallel conveyor sections.
Ready-made units in different lengths are the standard design provided.
Double loader conveyor with an S-curve
Double loader conveyors with an S-curve are used for the transport from nests lying one above the other.
The conveyor chain consists of two round link chains that are welded to metal rods.
The exact design of the chain rods can be adapted in each case (see rear side).
The units are provided with an offset curve in one of the conveyor sections in each case.
This serves to bring the eggs to one height for parallel transfer to the central conveyor line.
Loader conveyor
Loader conveyors are used for linear transport from adjacent nests at the same height or at different heights.
The conveyor chain consists of two round link chains that are welded to metal rods.
The exact design of the chain rods can be adapted in each case (see rear side).
These units are provided in designs with either one conveyor section or two parallel conveyor sections.
Loader conveyor with an S-curve
Loader conveyors with an S-curve are utilised for transport with obstacles in the linear conveyor characteristic.
The conveyor chain consists of two round link chains that are welded to metal rods.
The exact design of the chain rods can be adapted in each case (see rear side).
The unit is provided with an offset curve by means of which obstacles in the linear characteristic of the conveyor section can be avoided.
Steep conveyor direct
LUBING steep conveyors direct are used for linear transport with large differences in height.
Eggs are transported from slopes up to 50° to the central conveyor from adjacent nests that can be at the same height or at different
heights.
The conveyor chain consists of two round link chains that are welded to metal rods (with attachment plastic elements for gentle egg handling).
The LUBING electric drip oiler
With the electric drip oiler, the outer chain links of the conveyor chain are continuously supplied with an oil film, thus extending the conveyor chain’s service life.
Manual lubrication is no longer required.
The drive units
All LUBING drives for the short conveying distances are 0,18 kW motors.
They can be positioned on the left or right on the output end.
Various voltage levels are offered on request.
Furthermore, all motors can be actuated using a frequency converter.
The guide unit
The LUBING guide unit is used to evenly distribute the eggs to be transported on the conveyor chain and to keep them away from the transfer areas.
This prevents collisions between the eggs and thus reduces the number of cracked eggs on conveyors with lateral transfer to a minimum.
Design
In order to provide you with a conveying system that is exactly tailored to your needs, we will be pleased to prepare an individual design for your optimum conveyor