
Drinkers for Pigs

Drinkers for Piglets
Nipple drinkers for pigs and piglets with the acid proof stainless steel nipples
The LUBING nipples for pigs guarantee always fresh drinking water.
The robust design provides high working reliability with smallest maintenance.
The high quality materials provide for all nipples made complete of stainless steel a high acid resistance.
This construction provides a long service life of the nipples and sprayers.
Nipple and sprayer are connected directly to the water pressure pipe (max. 4 bar).
All stainless steel nipples have a sieve and a throttle disk with three holes to adapt the flowrate to the individual need.
By adjustment of the flow rate and the construction of the nipples the water waste is reduced to a minimum.
Art. 6006/6008/6026
The LUBING pig nipples art. 6006 (1/2“)/ 6008 (3/4“) for sows, breeding and fattening pigs with brass housing. Also the piglet nipple art. 6026 (1/2“) with brass housing and stainless steel point. Flow rates can be regulated from the outside with a adjusting screw.
Technical data:
Installation angle: 15°/45°
Installation height weaner: 25 – 60 cm
Installation height hog: 70 – 90 cm
Installation height sows: 90 – 110 cm
Flow rate 6006/08: 2 – 4 l/min
Flow rate 6026: 0.5 – 2 l/min
Pigs per Nipple 6006/08: max. 12 pigs
Pigs per Nipple 6026: 10 – 12 piglets
Art. 6130/6134 – Stainless steel acid-resistant
Art. 6130-5/6134-5 – Stainless steel
The LUBING piglet nipple for piglets rearing and preliminary fattening. The easy and problem-free activation secures a good water supply of the piglets. Art. 6130/6130-5 with hexagonal and art. 6134/6134-5 with flat. The flow rate can be adapted with the throttle disk.
Technical data:
Installation angle: 15°/45°
Installation height: 25 – 50 cm
Flow rate: 0.3 – 2.5 l/min
Pigs per Nipple: 10 – 12 piglets
Art. 6131/6135 – Stainless steel acid-resistant
Art. 6131-5/6135-5 – Stainless steel
The LUBING nipple drinker for fattening pigs. The versions with external hexagonal art. 6131/6131-5 and with flats art. 6135/6135- 5 with sturdy tappet and sturdy spring for a long life span. The flow rate can adapted with the throttle disk.
Technical data:
Installation angle: 15°/45°
Installation height weaner: 25 – 50 cm
Installation height hog: 50 – 70 cm
Flow rate: 0.3 – 2.5 l/min
Pigs per nipple: 10 – 12 pigs
Art. 6132/6133 – Stainless steel acid-resistant
Art. 6132-5/6133-5 – Stainless steel
The LUBING nipple drinker for boar and sows. The sturdy nipples with 1/2” external thread art. 6132/6132-5 and with 3/4” external thread art. 6133/6133-5 supply the large, necessary quantities of water. The flow rate can be adapted with the throttle disk.
Technical data:
Installation angle: 15°/45°
Installation height: 90 – 110 cm
Flow rate: 0.2 – 4.5 l/min.
Pigs per nipple: 1 – 4 pigs
Art. 6110/6111/6112/6114/6115 and 6113 – Stainless steel acid-resistant
Art. 6110-5/6111-5/6112-5/6114-5/6115-5 and 6113-5 – Stainless steel
The LUBING nipple for bowl drinker art. 6110/6110-5. Trough nipple art. 6111/6111-5/6112/6112-5/6114/6114-5/6115/6115-5. With the socket art. 6113/6113-5 the nipples can be fastened also to pipes with external thread. The flow rate can be adapted with the throttle disk.
Technical data:
Installation position: 2 – 5 cm above trough or bowl bottom
Flow rate: 0.2 – 4.5 l/min.
Pigs per nipple: 10 – 12 pigs
Art. 6101/6102/6103 und 6104 – Stainless steel acid-resistant
Art. 6101-5/6102-5/6103-5 und 6104-5 – Stainless steel
The LUBING trough sprayer for sows is fitted above the trough with the spray holes pointing towards the back. The pigs actuate the valve mandrel with their nose.
Technical data:
Installation position: 7 – 9 cm above trough bottom
Spraying angle (2 holes): 60°
Spaying angle (3 holes): 120°
Flow rate: 2 – 4 l/min.
Pigs per sprayer: 1 – 4 pigs
Brackets – acid-resistant
With the stainless steel brackets with 15° and with 45° the nipples or sprayers can be mounted at the wall. Connecting to the water line with the female thread.
Straight connecting pipes – acid-resistant
The straight connecting pipes with male threads on both sides or with a male thread and a female thread are available in lengths of 500, 750 and 1.000 mm.
Pipes with 15° bend – acid-resistant
Pipes with 15° bend without brackets are available in lengths of 380, 500, 750 and 1.000 mm.
Pipes with brackets – acid-resistant
1. Pipes with 15° bend and one bracket in a length of 380 mm or two brackets with a length of 500, 750 or 1.000 mm.
2. Pipes with two outlets on the same level and two brackets in a length of 660 mm or
3. with vertical offset in lengths of 600, 700 or 1.000 mm.
Circulation pipe – acid-resistant
Circulation pipes for circular pipeline with 4 brackets and one or two outlets with vertical offset and with 15° bend.
Partition pipe – acid-resistant
Partition pipe with two outlets with 15° bend. The distance between the brackets is 40 mm.