Steep conveyor “Climber“ for the eggtransport up to 60°
The principle
The LUBING Steep conveyor “Climber” works with two outer guided roundlink chains with welded cross bars.
This guarantees high performance of function.
Together with the plastic tab elements it is the key point of the conveyor and allows to have inclines or declines up to 60° (possible with cover caps only).
In the center of the conveyor no supports or guide elements are needed for dividing or diverting the egg flow.
The basic elements
All parts are according to the LUBING curve conveyor system but especially designed for farms with floor management as breeder egg farms as well as conveyors for dirty egg return and so on.
The system consists of proven standard parts as drives, bends, pivots, telescopes for lift systems and intermediate drives for long conveyors without transfers are parts of this concept.
Steep inclines or declines are accomplished on short distances.
Trouble free level changes of 67 inch (1,73 m) height by 39,5 inch (1 m) length are possible.
Custom plans available to suit individual requirements
Trampoline Transfer
A special net that absorbs shocks and transports the eggs softly into the conveyor chain.
Pivoting unit
Adjustable revolving pivoting units to alter up to 50° upwards.
Pivoting unit
Adjustable revolving pivoting units to alter up to 50° downwards.
End units
Simple and safe idling units located at the end of the conveyor line by using idling pulleys.
Bends
Bends are available with angles from 5° up to 180°.
Slope segment
Slope segments fixed for descends of 60° (possible with cover caps only).
Slope segment
Slope segments fixed for ascends of 60° (possible with cover caps only).
Connecting parts
Connecting parts are available in 1, meter (39,4 inch), 2 meter (78,8 inch) and 3 meter (118 inch) lengths.
Front drives
The conveyor is driven by the driving sprockets of the front drive.
A chain tensioner is integrated for the right tension of the chain.
Egg flow at ascend
No center supports disturb the egg flow due to outer guided roundlink chains.
Egg flow at descend
The tab element keeps the eggs in stable position at descends or ascends of the Conveyor-System.
Conveying at the bend
At the inner radius of the bends the eggs are lifted carefully by the tab elements of the conveyor chain.
Technical data
Measurement
