Vertical Conveyor Unit
for 90°
egg conveying without transfers
The vertical conveyor unit makes it possible to overcome the greatest height differences within smallest spaces.
The conveyor chain with plastic tab elements is the centrepiece of this unit.
This vertical conveyor chain inter- locks with the regular conveyor chain of the Conveyor-System and thus enables the eggs to be transported vertically without additional transfers.
Depending on the technical design, the vertical conveyor unit can be driven by the motors of the Conveyor-System or by a separate motor.
The unit works with two externally guided round link chains connected by cross bars with tab elements.
No support elements or guide elements are needed in the middle of the conveyor which divide or divert the egg flow.
All components have been derived from the LUBING Curve Conveyor System and have been specially developed to meet the needs of farms with floor or aviary housing.
Ask us for possibilities to create a tailor-made individual solution for you.
Advantages of LUBING Vertical Conveyor
- gradients or inclines with 90°
- no additional transfers
- highest functional reliability due to two exter- nally guided round link chains
- no centrally placed support or guide elements required: no interfering contours on the conve- yor line
- the individually replaceable tab elements made of high-quality plastic ensure the secure position of the eggs in the transition from level to slope and for vertical conveying
- the special design of the tab elements ensures gentle egg handling
The vertical unit of the Lubing egg transport system is one of the new products presented at the Hannover fair.
A new patented system for carrying eggs vertically, up to a maximum height of 8 m.
The standard conveyor chain is combined with a second underlying chain, which comes out very lightly, and delicately picks up the eggs and carries them upwards.
This completely vertical solution solves all those technical problems that arise when space is very limited and considerable heights must be reached.
The old technologies, the ascent and descent groups, did not allow reaching such important heights in a very limited space.
Lower curve uphill
The tab elements are lowered downwards between the bars of the conveyor chain and place the eggs on the Conveyor-System chain.
90° vertical segment upwards
Safe position of the eggs for 90° conveying upwards.
No cover required.
Upper curve uphill
The vertical conveyor chain pushes the top elements from below between the bars of the conveyor chain and brings the eggs into a safe position for vertical conveying upwards.
Upper deflector
Deflection rolls create the necessary space to deflect the vertical conveyor chain for its return run, while the chain of the Conveyor-System follows the further course.
Lower deflector
Used to tension and deflect the vertical conveyor chain.
Can be fitted with a motor for its own drive.
The chain of the Conveyor-System is guided past by deflections.
Upper curve downhill
The vertical conveyor chain pushes the tap elements from below between the bars of the conveyor chain and brings the eggs into a safe position for vertical conveying downwards.
90° vertical segment downwards
Safe position of the eggs for 90° conveying upwards.
No cover required.
Lower curve downhill
The tab elements are lowered downwards between the bars of the conveyor chain and place the eggs on the Conveyor-System chain.
Technical Data
Layout
